Supports · TS-CH
Channel Strut 41 × 41 / 41 × 21
Slotted lipped channel that forms hangers, brackets and frames for every tray in the range.
Drag to orbit · scroll to zoom
Real-time 3D · illustrative
Overview
Lipped channel with a slotted back is cut to length on site and fixed with spring nuts. It builds trapeze hangers, wall brackets and floor frames, and carries tray, conduit and pipework on the same support.
Key features
- Plain and back-to-back
- Spring nuts M8 / M10 / M12
Specifications
Technical data TS-CH
| Product family | TS-CH — Channel Strut 41 × 41 / 41 × 21 |
|---|---|
| Widths W | 41 mm |
| Side heights H | 41, 21 mm |
| Thickness t | 2.0, 2.5 mm |
| Length | 3000 / 6000 mm |
| Material | S235JR / DC01 |
| Perforation | Back slots 13 × 30 mm at 50 mm pitch |
| Code format | TS-CH-[41|21]-[t×10]-[finish] |
| Code example | TS-CH-41-25-HDG |
Standards
References
- BS EN ISO 1461
Load data
Safe working loads and support spans will be published after type testing to IEC 61537. Until then, support spacing follows the project specification; our engineers can advise on typical spans for your cable load.
Finishes
Available finishes
HDGHot-dip galvanised after fabricationBS EN ISO 1461 — mean zinc ≥ 55 µm on steel 1.5–3 mm (≥ 45 µm below 1.5 mm)
PGPre-galvanised (Sendzimir) steelEN 10346 DX51D+Z275 — 275 g/m² total, about 20 µm per side
SSStainless steel 316LEN 10088-2 grade 1.4404 — marine, food and chemical areas
System
Compatible accessories
Installation
Installation notes
- Set out and fix supportsTrapeze hangers or cantilever arms on the route line; add a support within 600 mm of each fitting.
- Lay straight sectionsKeep splice joints near supports, away from mid-span.
- Join with splice platesOne plate each side, M6 round-head bolts with heads inside the tray; tighten flange nuts.
- Lay cables and fit coversTie cables to the base slots; clip covers every metre where specified.
- Earth bondingBond the run to earth where the project specification requires it.
Need a submittal?
We prepare the technical submittal for TS-CH: datasheet, dimensioned drawings, material certificates and samples, ready for consultant review.
Request technical submittal