Download catalog Request a quote
ENعربي

Covers · TS-CV

Tray Covers

Flanged covers with stiffening ribs for indoor runs, and peaked covers that shed rain and debris outdoors.

Tray Covers Drag to orbit · scroll to zoom Real-time 3D · illustrative

Overview

Covers protect cables from falling objects, dust and direct sun. Flat covers clip over the return flange of the tray; peaked covers are used outdoors so water runs off. Matching covers are made for every bend, tee and cross.

Key features

  • Flat flanged and peaked
  • Cover clamps every 1 m
  • Matching covers for bends, tees and crosses

Specifications

Technical data TS-CV

Product familyTS-CV — Tray Covers
Widths W50, 100, 150, 200, 300, 400, 500, 600 mm
Thickness t0.8, 1.0, 1.2 mm
Length3000 mm; covers for every fitting
MaterialDX51D+Z275 or DC01
Code formatTS-CV[F|P]-[W]-[finish]
Code exampleTS-CVF-300-PG

Standards

References

  • IEC 61537 (test reference)

Load data

Safe working loads and support spans will be published after type testing to IEC 61537. Until then, support spacing follows the project specification; our engineers can advise on typical spans for your cable load.

Finishes

Available finishes

HDGHot-dip galvanised after fabricationBS EN ISO 1461 — mean zinc ≥ 55 µm on steel 1.5–3 mm (≥ 45 µm below 1.5 mm)
PGPre-galvanised (Sendzimir) steelEN 10346 DX51D+Z275 — 275 g/m² total, about 20 µm per side
PCPolyester powder coat, RAL 7035 (any RAL on request)60–80 µm over pre-treated pre-galvanised or HDG steel
SSStainless steel 316LEN 10088-2 grade 1.4404 — marine, food and chemical areas

System

Compatible accessories

TS-FSFastener Sets

Installation

Installation notes

  1. Set out and fix supportsTrapeze hangers or cantilever arms on the route line; add a support within 600 mm of each fitting.
  2. Lay straight sectionsKeep splice joints near supports, away from mid-span.
  3. Join with splice platesOne plate each side, M6 round-head bolts with heads inside the tray; tighten flange nuts.
  4. Lay cables and fit coversTie cables to the base slots; clip covers every metre where specified.
  5. Earth bondingBond the run to earth where the project specification requires it.
Need a submittal?

We prepare the technical submittal for TS-CV: datasheet, dimensioned drawings, material certificates and samples, ready for consultant review.

Request technical submittal