Cable Trays · TS-WM
Wire Mesh Cable Tray
Welded 4.5 mm wire basket for data centres and light cabling. Coming once the wire-welding line is commissioned.
Drag to orbit · scroll to zoom
Real-time 3D · illustrative
Overview
Wire mesh tray is light, open and shaped on site with bolt cutters — bends and tees are made by cutting and joining the mesh. It is the standard for data centres, ceilings and raised floors.
Key features
- Cut and bend on site without special fittings
- T-weld safety edge
- Very light, fast to install
Applications
Where it is used
- Data centres and server rooms
- Above false ceilings and under raised floors
Specifications
Technical data TS-WM
| Product family | TS-WM — Wire Mesh Cable Tray |
|---|---|
| Widths W | 50, 100, 150, 200, 300, 400, 500, 600 mm |
| Side heights H | 30, 60, 100 mm |
| Thickness t | Wire Ø 4.5 / 5.0 |
| Length | 3000 mm |
| Material | Low-carbon steel wire |
| Perforation | 50 × 100 mm mesh |
| Code format | TS-WM-[W]-[H]-[finish] |
| Code example | TS-WM-300-60-EG |
Standards
References
- IEC 61537 (test reference)
Load data
Safe working loads and support spans will be published after type testing to IEC 61537. Until then, support spacing follows the project specification; our engineers can advise on typical spans for your cable load.
Finishes
Available finishes
System
Compatible accessories
Installation
Installation notes
- Set out and fix supportsTrapeze hangers or cantilever arms on the route line; add a support within 600 mm of each fitting.
- Lay straight sectionsKeep splice joints near supports, away from mid-span.
- Join with splice platesOne plate each side, M6 round-head bolts with heads inside the tray; tighten flange nuts.
- Lay cables and fit coversTie cables to the base slots; clip covers every metre where specified.
- Earth bondingBond the run to earth where the project specification requires it.
We prepare the technical submittal for TS-WM: datasheet, dimensioned drawings, material certificates and samples, ready for consultant review.
Request technical submittal